Dry Powder Filling and Rubber Stoppering Machine - Exporter, Importer, Manufacturer & Supplier, Ahmedabad, India

Product Code : 08

[Select]

Product Specification

Automatic Injectable Powder Filling with Rubber Stoppering is a compact model used for filling Stoppering of Dry Powder Injectable in to vials.

The incoming dry container sterilized are fed through the Unscrambler and suitably guided on the moving delrin flat conveyor belt at the required speed of the correct placement below powder wheel.

The sterilized powder is stored in powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density. The powder wheel having eight ports rotates at the pre determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel vacuum plate is provided there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade. Doctor blades can be adjusted from outside also without removing powder hopper. When powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertically above the container. The time dose of Compressed air (Nitrogen Gas), sterilized low pressure air sequentially flushes out powder from the port of powder wheel in to the container one by one.

The filled container is immediately separated on the conveyor by vial separator and moves further for Stoppering operation. (Different grooves separator can be used which depends on the container diameter or multiple dosing systems).

The sterilized, siliconised, rubber stoppers stored in the vibrator bowl moves to vibratory bowl and stacked vertically in the rubber stopper chute. The container is hold firmly between pair or timing belt to pickup rubber stopper from exit end of the chute. Further the container is passed between two pressing roller for tight fit fixing of rubber stopper.

Silent Features

M.S. moulded structure duly powder coated to avoid any vibration with adjustable screws to adjust conveyor height as per in feed tunnel.
Total Table top cGMP model.
All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilisation.
"NO VIAL, NO FILL" System eliminates wastage of costly powder.
Spring loaded Teflon top seal for powder hopper reduces the friction between and top seal and avoid chance of white particle shading during production.
Doctor blade and wiper blade can be adjusted from outside also without disturbing any production, which saves lot of time, powder wastage and chances of area condition disturbance.
All assemblies under top plate are positioned as for easy cleaning or maintenance.
Multiple dosing of Injectable powder or change over of container size and different fill size is possible by just changing the vial separator or size of the piston respectively.
All driving is through High quality imported Gear motor for better machine performance without vibration or leakage of oil of area floor from gear box.
Machine speed can be adjusted through A.C. Frequency drive, which is time saving and easy to synchronise Unscrambler and scrambler speed with machine speed.
Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
Special clutch devices are provided on vial separator for safety purpose.
Vibratory bowl for rubber Stoppering unit support to run machine with total claimed speed of machine.
Air filter will be of S.S.316 housing with Nylon cartridge for proper removal of particle of 0.22 micron having 10Ã¢â‚¬ï¿½ length.
Vacuum filter will be of PVC transparent material with nylon cartage having length of 10Ã¢â‚¬ï¿½.
Imported Gear Motor for Main drive, Unscrambler and scrambler.
A.C. Frequency drives for Main drive, Unscrambler and Scrambler.
Pre and Post Gassing unit for Nitrogen or Carbon Dioxide flushing.
Pure air filter for Air and Vacuum.
"No Vial, No Filling System".
"No Stopper in Chute, Machine Stop System"
Vacuum pump.
Acrylic Cabinet with Imported Aluminium Structure for Machine, Unscrambler and Scrambler.

Technical Specification

MODEL NO.	SBPF-125.	SBPF-250D.
Direction	Left To Right.	Left To Right.
Production Rate	Up to 120 Fills / Min for Single Dose. Upto 60 Fills / Min for Double Dose. Upto 40 Fills / Min for Triple Dose. Upto 30 Fills / Min for Four Dose.	Up to 240 fills / Min for Single Dose. Upto 120 Fills / Min for Double Dose. Upto 80 Fills / Min for Triple Dose. Upto 60 Fills / Min for Four Dose.
Fill Capacity	50 mg to 1.5 grms. Single Dose (with Change Parts) 1.5 grms to 6 grms. Double, Triple and Four Dose. Fill range depending upon vial opening and bulk density of powder. Under controlled level of Humidity (i.e. 25%)	50 mg to 1.5 grms. Single Dose (with Change Parts) 1.5 grms to 6 grms. Double, Triple and Four Dose. Fill range depending upon vial opening and bulk density of powder.
Accuracy	Ã‚Â±1% depending upon consistency and uniformity of bulk density of Injectable powder	Ã‚Â± 1% depending upon consistency and the uniformity of bulk density of Injectable powder Under controlled level of Humidity (i.e.25%)
Electrical Supply	1.00 HP For Main Drive. 0.50 HP For Unscrambler. 0.50 HP For Scrambler.	1.00 HP For Main Drive. 0.50 HP For Unscrambler. 0.50 HP For Scrambler.
Power Requirement	440 Volts, 3 Phase (4 wire System) 50 Hz.	440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor	Adjustable from 800 To 850 MM	Adjustable from 800 To 850 MM
Dimensions	3028 MM (L) X 1093 MM (W) X 1885 MM (H)	3759 MM (L) X 1242 MM (W) X 1885 MM (H)
Net Weight	800 KGS. (Approx.)	1050 KGS. (Approx.)
Gross Weight	1200 KGS. (Approx.)	1550 KGS. (Approx.)
Vial Diameter	25 MM To 45 MM MAX.	25 MM To 38 MM MAX.
Height	75 MM MAXIMUM.	75 MM MAXIMUM.
Rubber Stopper	20 MM DIAMETER.	20 MM DIAMETER.
Pneumatic Air	Filtered, oil free, sterile low pressure AIR at 2 kg/cm2 (2/3 bar)	Filtered, oil free, sterile low pressure AIR at 4 kg/cm2 (4/6 bar)
Vacuum line	20 HG. (Pump will be supplied by S.B.)	20 HG. (Pump will be supplied by S.B.)

MODEL NO.	SBDPF - 60
NO OF TRACK	One
NO OF POWDER WHEEL	One
PRODUCTION RATE	UP TO 60 Fills / Min. for SINGLE Dose UP TO 30 Fills / Min. for DOUBLE Dose UP TO 20 Fills / Min. for TRIPLE Dose
FILL CAPACITY	5 gms. to 30 gms. With the help of Two Different Powder Wheel Depending on Neck diameter and Powder characteristics
ACCURACY	+ 2% Depending upon the consistency, uniformity & bulk density of powder under the controlled level of humidity
ELECTRICAL RATING	0.75 HP (1400 RPM) Motor
POWER REQUIREMENTS	415 Volts, 3 phase (4 Wire System) 50 Hz.
HEIGHT OF CONVEYOR	Adjustable from 800 mm. to 850 mm.
DIMENSIONS	1270mm (L) x 600mm (W) x 1725mm (H)
INPUT SPECIFICATION:
CONTAINER DIAMETER	25mm to 70mm
CONTAINER HEIGHT	55mm to 120mm Maximum
NOTE: ALSO AVAILABLE SBDPF-100 MODEL

Other Products in 'Automatic Filling Machine' category

Automatic Bottle Filling & Cap Sealing Machine	Automatic Auger Powder Filling Machine	Automatic Liquid Filling Machine	Automatic Liquid Vial Filling & Rubber Stoppering Machine

<< Back