|
Automatic Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.
The incoming dry bottle sterilized is fed through the in feed Turn
Table with suitably guided on the moving delrin flat conveyor belt at
the required speed for feeding. There are two separate filling head
mounted on machine top plate in the same line. When bottle reaches to
the first filling station, it will be held by the pneumatic bottle
holder. Immediately it will be sensed by the bottle sensor as soon as
it gets signals from sensor magnetic clutch starts to rotate which is
mounted on auger shaft. It will fill the desired amount of powder to
the bottle through auger, where rotation time is previously saved in
PLC control. After filling of first bottle pneumatic piston goes back
and release the first bottle to move on conveyor, By the same time
second bottle also moves along with the first bottle in empty
condition. In second filling head same operation will be performed but
this time second bottle get filled and first bottle moves further for
next operation. The main advantage of this machine is Pneumatic bottle
holding system is directly connected with Auger rotation, so till
bottle get filled with powder as per set value pneumatic system will
not going to release the bottle.
Silent Features
- Total Compact c GMP model.
- All parts and assemblies coming in contact with powder and rubber
stopper are made of S.S.316 and easily removable for mandatory
Autoclaving/ Sterilization.
- "NO BOTTLE, NO FILL" System eliminates wastage of costly powder.
- Conveyor driving is through High quality imported Gear motor
- Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
- Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
- Single track bottle movement, reduces setting of supporting guide
rails and semi skilled person can also easily operate the machine.
- Pneumatic bottle holding system is connected with auger rotation,
which eliminates chances of bottle transfer before completion of
filling operation.
- No change parts are required for any change in bottle diameter from 30 to 120 ml.
- Imported Gear Motor for Conveyor drive.
- A.C. Frequency drive for Conveyor drive.
- "No Bottle, No Filling" System.
- Pneumatic bottle holding system.
Technical Details
|
Model
|
SBAF-60
|
SBAF-D-100
|
|
Direction
|
Left
To Right.
|
Left
To Right.
|
|
Production
Rate
|
Up
to 30 to 40 Bottles / Min
|
Up
to 60 to 80 Bottles / Min.
|
|
Fill
Capacity
|
10
grms to 50 grms. (with different set of Auger and funnel) Fill
range depending upon Bottle opening and bulk density of powder.
|
10
grms to 50 grms. (with different set of Auger and funnel) Fill
range depending upon Bottle opening and bulk density of powder.
|
|
Accuracy
|
±
2% depending upon consistency and the Uniformity of bulk density
of powder under controlled level of Humidity (i.e.35%)
|
±
2% depending upon consistency and the Uniformity of bulk density
of powder under controlled level of Humidity (i.e.35%)
|
|
No.
of Heads
|
Single
|
Two
|
|
Electrical
Supply
|
1.00
HP For Main Drive.
0.25 HP for conveyor
|
2.00
HP For Main Drive.
0.25 HP for conveyor
|
|
Power
Requirement
|
440
Volts, 3 Phase (4 wire System) 50 Hz.
|
440
Volts, 3 Phase (4 wire System) 50 Hz.
|
|
Height
of Conveyor
|
Adjustable
from 850 To 900 MM
|
Adjustable
from 850 To 900 MM
|
|
Dimensions
|
1524
MM (L) X 1105 MM (W) X 1800 MM (H)
|
2200
MM (L) X 1102 MM (W) X 1817 MM (H)
|
|
Net
Weight
|
400
KGS. (Approx.)
|
550
KGS. (Approx.)
|
|
Gross
Weight
|
600
KGS. (Approx.)
|
800
KGS. (Approx.)
|
|
Bottle
Diameter
|
25
MM To 70 MM MAX.
|
25
MM To 70 MM MAX.
|
|
Height
|
55
MM To 110 MM.
|
55
MM To 110 MM.
|
|
Pneumatic
Air
|
Filtered,
oil free, sterile low pressure AIR at 5 kg/cm2
|
Filtered,
oil free, sterile low pressure AIR at 6 kg/cm2
|
|
